Crack repair
Cracks are cut, cleaned and filled so water stops working its way into the slab and under the base.
Austin, Texas
Not every damaged slab needs replacing. Cracks, spalling and settled sections can often be repaired for a fraction of a full tear-out — as long as what caused the damage is addressed too.
Send us a description over the phone and we will tell you whether it sounds like a repair or a re-pour.
What the work involves
Cracks are cut, cleaned and filled so water stops working its way into the slab and under the base.
Where the surface is worn or spalled but the slab underneath is sound, an overlay restores a clean, even top.
Sections that have dropped create trip hazards and drainage problems. Depending on the cause, they get leveled or cut out and re-poured.
Replacing a bay or a panel at the joint lines is often cleaner and cheaper than tearing out an entire driveway.
Service FAQs
Related work
Control-jointed slabs sized to your lot, graded for drainage and finished to a clean steel-float sheen.
Slab-on-grade and foundation work poured to spec — straight edges, level tops and clean transitions.
Level, stable surfaces for outdoor living and foot traffic, laid on a properly compacted base.
There is no form to fill in. Call and describe the job — we will tell you what the pour involves and what happens next.